Features :

[Modular Floor Standing Extensible Enclosures]
[Modular Floor Standing Extensible Enclosures]
   
   
   
[Modular Floor Standing Extensible Enclosures]
   

 Strongest design available in enclosures.
 Perfect Strength to weight ratio.
 Better Ingress protection (Up to IP-55).
 Multi color powder coating is possible.
 
Sub-assemblies :
 Frame structure : 3.00 thk folded CRCA sheet with vertical and horizontal (depth) indexing holes of dia 9 & dia 4.2 in pitch 12.5mm.

 Base : 3.00 thk folded sheet with removable front and rear cover in 2.00 thk.

 Door : Front & rear single door split door /partial door in 2.00 thk CRCA sheet. With support channels, sheet metal special hinges, 3/4 point handle lock.

 Cover : Front fixed bolted cover in 2.00thk for instrumentation panel in place of door. when door not necessary at rear screwed cover in 1.5 thk.

 Gland plate : Varying combination like, Folded CRCA bottom cover or Slotted / perforated bottom cover in 1.5 thk (for ventilation from bottom if required).

 Side cover : Screwed side cover in 1.5 thk CRCA sheet.

Features :

[Modular Floor Standing Enclosures (MFS)]
[Modular Floor Standing Enclosures (MFS)]
   
   
   
[Modular Floor Standing Enclosures (MFS)]
   

 A Strongest design available in enclosures.
 Good Strength to weight ratio.
 Better TP protection (Up to IP55).
 Quite economic design.
 
Sub-assemblies :
 
 Welded Body : In 2.00 thk folded CRCA sheet with vertical and horizontal (depth) indexing holes of dia 9 & dia 4.2 in pitch 12.5mm.

 Base : 3.00 thk folded sheet with removable front and rear cover in 2.00 thk.

 Door : Front & rear single door / split door /partial door in 2.00 thk CRCA sheet. With support channels, sheet metal special hinges, 3/4 point handle lock, 'D' type PU foam gasket.

 Cover : Front fixed bolted cover in 2.00thk for instrumentation panel in place of door. when door not necessary at rear screwed cover in 1.5 thk.

Features :

[Wall - Machine Mounting Enclosures]
[Wall - Machine Mounting Enclosures]
   
   
   
[Wall - Machine Mounting Enclosures]
   

 This is suitable for smaller size enclosures.
 Better IP Protection (Up to IP67)
 
Parts of enclosure :
 
 Welded Body : It's body is closed from sides, rear,top & bottom in 1.5 / 2.00 thk folded CRCA sheet.

 Base : it is optional

 Front single /split / partial doors : Made in 2.00 thk CRCA sheet with
support frame, sheet metal special hinge, cam locks.

 Gland plate: At top or bottom in 2.00 thk CRCA.

Features :

 IP-67 Ingress protection.
 Welded body with sides, top and bottom closed in 1.2 thk folded CRCA sheet.
 Front single door in 1.2 thk CRCA sheet. With metal hinges, cam locks.
 Polyethylene gasket on door and polyurethane foam on gland plate, both are fire retardant.
 M-4 tapped Z angles inside for DIN rail mountings (No component mounting plate inside).
 As side walls are not removable, inter panel separator is not required here.
 Gland plate optional at bottom in 2.00 thk CRCA.
 These types of enclosures are not suitable to join together, however if needed we can join them.

Features :
 The best IP protection (IP-55)
 Standard construction (design).
 Manufactured in modules.
 Floor standing or wall mounting arrangement is possible.
 Modifications possible at customer end also if needed.
 Modularity of extensibility and internal arrangements.
 Easy handling and transportation. 

Features :
 Welded body with sides, top and bottom closed in 1.5/2.00 thk folded CRCA
sheet.
 Very strong and sturdy arm manufactured in 65x65 square tubes in 3.00 thick
sheet.
 Front single door in 2.00 thk CRCA sheet with, 'D' type foam gasket.
 Polyethylene gasket on door and polyurethane foam on gland plate, both are
fire retardant.
 Swiveling thrust bearing with inner diameter 58mm for cable passing.
 As side walls are not removable, inter panel separator is not required here.
 These types of enclosures are not suitable to join together, however if needed
we can join them.

Features :
 Welded body with sides, top and bottom closed in 1.5/2.00 thk folded CRCA sheet.
 Front single door in 2.00 thk CRCA sheet with PV foam gasket
 'D' type PU foam gasket on door and on gland plate, fire retardant.
 As side walls are not removable, inter panel separator is not required here.
 Very special construction for operator ease in standing position.
 These types of enclosures are not suitable to join together,
however if needed we can join them.

Features :
 Better IP protection.
 The best aesthetic look.
 Clear acrylic fitted on monitor door. 
 Sliding drawer for keyboard with high quality telescopic rails with arrangement for mouse pad below drawer. 
 Lower compartment can accommodate CPU along with stabilizer / UPS. 
 There is space for Printer and stationery in case of standing operation PC enclosures. 
 CPU tray can be adjusted in height without any tool
 Drawer has some additional space for any other material. 
 Separate open compartment for CD's, books and other essential material. 
 Castors or base can be fitted at bottom.
 Ventilation through dust proof filters grills. 
 Very much economical construction 

Features :
 Better IP protection.
 The best aesthetic look.
 Decorated monitor compartment.
 Monitor tray adjustable in height for better vision.
 Toughened glass / clear acrylic fitted on monitor door.
 Gas springs used for monitor door opening and for 
holding it upwards. Enables hands free operation.
 Sliding drawer for keyboard with high quality telescopic rails with arrangement for mouse pad below drawer.
 Lower compartment can accommodate CPU along with stabilizer / UPS. There is space for Printer and stationery in case of standing operation PC enclosures.
 CPU tray can be adjusted in height without any tool.
 Castors or base can be fitted at bottom.
 Ventilation through dust proof filters grills. 

Features :
 Better IP protection.
 The best aesthetic look.
 Decorated monitor compartment.
 Monitor tray adjustable in height for better vision.
 Toughened glass / clear acrylic fitted on monitor door.
 Gas springs used for monitor door opening and for holding it upwards.
Enables hands free operation.
 Sliding drawer for keyboard with high quality telescopic rails with arrangement for mouse pad below drawer.
 Lower compartment can accommodate CPU along with stabilizer / UPS. There is space for Printer and stationery in case of standing operation PC enclosures.
 CPU tray can be adjusted in height without any tool.
 Drawer has some additional space for any other material.
 Separate open compartment for CD's, books and other essential material.
 Castors or base can be fitted at bottom.
 Ventilation through dust proof filters grills. 

Features :
 The best IP protection (IP-55).
 Better strength.
 Modularity for internal assembly. Doesn't require more pre-engineering.
 Width and depth adjustable cylinder mounting channels on a 25mm pitch.
 Doors with hydraulic power closers keeps door normally closed with push to open single point lock.
 Wire reinforced toughened glass fitted on doors with support channels (plated or powder coated) screwed on the doors.
 Fire retardant & chemical resistant Polyurethane foamed D type gaskets (workability at 100°C temperature) on doors.
 Air suction duct at top for disposal of gas leakages.
 Heavy 5.00mm thick unfolded plate used as bottom for more strength and easy cylinder placing inside cabinet. 

Features :
 The best IP protection (IP-55).
 Better strength.
 Modularity for internal assembly. Doesn't require more pre-engineering.
 Rain canopy is fitted on top of enclosure to minimize rain water contact with enclosure.
 Universal mounting of doors and covers so that they can be interchanged or reverted,
 Fire retardant & chemical resistant Polyurethane foamed D type gaskets (workability at 100°C temperature) on doors and covers for better IP protection.
 Detachable all the doors and covers facilitates faster interior assembly.
 Stronger support channels (plated or powder coated) screwed on the doors.
 Punched holes having pitch of 12.5mm.
 Depth and height adjustable mounting of component plate and horizontal / vertical partitions.
 Clamped and folded gland plates in parts for easy removing and fitting. Gland holes not necessary to decide earlier, can be drilled at site also.
 Stainless Steel hinges and hardware is used for long lasting.
 For low corrosive area special outdoor duty powder coating is provided on CRCA MS sheet enclosure to resist UV rays and fading effects due to outdoor environment.
 For medium corrosive area special outdoor duty powder coating is provided on galvanized (GPSP - Galvanized Plates with Skin Passed) sheet enclosure to resist UV rays and fading effects due to outdoor environment. It lasts double the normal enclosure.
 For high corrosive area these are manufactur

Features :
 The best IP protection (IP-54).
 Best strength for 1200 depth also. 
 Modularity for internal assembly. Doesn't require more pre-engineering.
 Each & every compartment is a separate box and hence we can alter complete elevation at any stage. 
 Punched holes having pitch of 12.5mm. 
 Universal mounting of doors and covers so that they can be interchanged or reverted, 
 Detachable all the doors and covers facilitates faster interior assembly. 
 Stronger support channels (plated or powder coated) screwed on the doors.
 Fire retardant & chemical resistant Polyurethane foamed D type gaskets (workability at 1000C temperature) on doors and covers for better IP protection. 
 Easy and modular busbar mounting is provided in bus chambers. 
 Depth and height adjustable mounting of component plate and horizontal / vertical partitions.
 Clamped and folded gland plates in parts for easy removing and fitting. Gland holes not necessary to decide earlier, can be drilled at site also.
 Angular mounting of terminals provides spacious access. 
 Sheet metal folded base looks attractive with ease in grouting (Grouting holes visible).ISMC base also can be provided. 

Features :
 Welded body with sides, top and bottom closed in 1.5/2.00 thk folded
CRCA sheet or modular frame structure in 3.00 thk.
 Canopy can be mounted on top.
 Sides can be covered with covers with punched ventilation lovers.
 It can be manufactured in GI sheets or stainless steel sheet for outdoor
use.

Features :
 These are manufactured in JB, WMM, MFS & MFSE Contrustion. 
 All the facilities are same as it's respective design. For details please refer page. No. 1,2,3 or 4
 SS 304, SS 316 material grade are available. 
 Surface finish is available in matt or glossy.
 Refer respective page for size variables.

Features :

[Insulated Enclosures]
[Insulated Enclosures]
   

 Better IP protection. 
 This is manufactured in 'Modular Floor Standing Extensible Enclosure' (MFSE Construction. For Sizes and facilities please refer page 1. 
 50mm glass wool or rock wool is used as insulation.
 Cutout pockets on all sides (if any) are also insulated with nitrile foam gasket sheets.
 Only 1OOmm in width, 1OOmm in depth and nothing in height is consumed for insulation. 
 Compact in size and hence energy saving (Heave reduction in A.C. capacity specoification). 
 Modularity is maintained and hence width can be extended. 
 Use for Outdoor duty is possible with some changes without much increase in cost. Costing is 25% of E Room. 
 This is better replacement for E Room.